PTH0039 - Photo-Etched Upper Hull Detailing Set
A set of photo-etched parts for detailing upper hull including exquisite brass tube holder with caps for storing gun barrel cleaning rods and spare antennas. Recommended for experienced modellers. Instrcutions provided.

PTH0018-TA - Crew Compartment Heater (Late)
Highly detailed metal crew heater fitted above the left engine vent found on late production Panther G. Suitable for Tamiya Panther. Use in place of plastic parts F6 and F11 supplied with Tamiya kit. Some modelling experience recommended.

PTH0021 - Working Bosch Headlight
Front Bosch headlight includes LED, cable and resister for 7.2V battery. Can be adapted for Tamiya Panther and other German tanks. Use in place of plastic parts F5, F7 and F23 supplied with Tamiya kit. Some modelling experience recommended.

PA0016 -Air Exhaust Armoured Cover
Highly detailed cooling air exhaust armourd cover made from resin.Can be used on left side of Panther engine deck in place of crew heater to depict an early model G.

PA0010 -Detailed Tow Cables Kit
Highly detailed parts to make two complete towing cables for Panther. Each 2mm cable is approximately 40cm in length and can be cut and shaped to requirement. Comprises 4 Nickel Silver thimbles, 4 aluminium cable jackets and 2 lengths of soft flexible cables. Use in place of parts D7 & silly strings.

PA0015 - Steel Aerial
Correctly shaped steel aerial with conical tip for Panther G. Replace aerial with safety triangle on top supplied with kit.

PA0021 - Hull Detail Set
Set of hull detailing parts including mounting reel for track repair cable, 6 small hooks for air intake covers on engine deck and two pins for the tow cable holder at the front of the tank. Replaces part F27 supplied with Tamiya kit plus new parts now available in kit. See right side of this page for illustrations.

PA50147 -Track Replacement Cable Kit
Track replacement cable with two eyelets. Use in place of parts B17 and 'string' provided with kit. Use in conjunction with mount included in Hull Detail Set PA0021.

1/16 Jagdpanther - Upgrade Parts (Rear Hull)

PTH0001-TA - Rear Hull Plate
Alternative Panther rear hull plate. Use instead of part C1. Required for use with some rear hull super-detailing parts on this page such as the exhaust systems and functional photo-etched rear storage bins. See below for more details.

PTH0017 - Panther G Rear Exhausts Assembly (Late)
Quality metal parts provided as shown for late production exhaust system with flash suppressor. Highly detailed. Use in place of plastic parts B14 and B15 supplied with Tamiya kit. Some modelling experience recommended. Photo-etched parts included.

PTH0019 - Panther G Metal Jack with Mount
Highly detailed metal jack kit suitable for all German Tanks. Some modelling experience recommended. Cast metal parts need to be separated from stalk and finished. Use in place of plastic parts F25, F26, F32, F33 and F37supplied with Tamiya kit.

PTH0020 - Panther G Towing Shackles
Set of four correctly shaped fully functional towing shackles for Panther. Bolts are removeable as shown. Replaces Part B8 and B9 supplied with Tamiya kit.

PTH0024 - Panther G Rear Column Light
Rear Column Light. Includes LED, cable and resister for 7.2V battery. Can be adapted for Tamiya Panther and other German Tanks. Some modelling experience recommended.

1/16 Jagdpanther - Upgrade Parts (Lower Hull)

PA0018F - Metal Sprocket Mounts
Sturdy replacement metal sprocket mounts for Panther. High quality finished product ready for use in place of plastic parts E4 and E7 supplied with Tamiya kit.

PA0018R - Metal Rear Panel Brackets
Sturdy replacement metal brackets either side of Panther rear panel for tow shackles. Use in place of plastic parts E13 and E15 supplied with Tamiya kit.

PTH0005-TA - Transmission Housing Set
Glaring ommission from the Tamiya kit. Includes bearing support wheels. Highly detailed. Suitable for use with Tamiya Panther. Some modelling experience recommended.

PA30177 - Panther G Early Roadwheels Set
Complete set of fully-assembled highly-detailed machined roadwheels with equally detailed caps. include real rubber rim, brass bushing and axels. Come ready to fit onto Tamiya chassis. A set of finished high grade metal roadwheels without the sweat!

PTH0044-TA - Late Steel Roadwheels Set
Complete set of machined roadwheels with cast metal covers to convert Tamiya's Early Panther G to a late model. Comes ready to mount with wheel caps, axels and two brass bushes for each roadwheel.

PAMT01HG - Metal Tracks (High Grade)
Set of high grade 'closed pin' metal tracks designed for Tamiya Panther. More accurate and substantial version with no pin showing. Fits standard Tamiya metal sprockets that come with kit.

PAMT02SG - Metal Tracks (Standard Grade)
Set of standard grade 'open pin' metal tracks designed for Tamiya Panther. Fits standard Tamiya sprockets that come with kit. Essentially a copy of the Tamiya plastic tracks in metal.

PTH0023 - Suspension Upgrade Kit
Upgrade kit for suspension that uses adjustable springs for a more realistic posture. Suitable for Tamiya Panther

1/16 Photo-Etched & Other Detailing Parts

PTH0027 - Photo-Etched Set for Rear Storage Bins
Super-detailing photo-etched parts for Panther Rear Storage Bins. Fully functional. Required PTH001-TA Rear Hull Plate. Recommended for experienced modellers.

PTH0033 - Photo-Etched Set for Crew Heater
Super-detailing photo-etched parts for use with part PTH0018 Crew Compartment Heater Kit. Recommended for experienced modellers.

PTH0035 - Photo-Etched Mud Guards Set
Super-detailing photo-etched parts for making a pair of Panther mud guards. Can be adapted for use with Tamiya Panther. Recommended for experienced modellers. All screws included.

PTH0038 - Photo-Etched Side Skirts Field Modification Set
Assortment of replacement side skirt or schurzen panels use in the field to replace damaged or lost panels. two plates each of two patterns supplied as shown.

PTH0041 - Spare Track Holder Set
Highly detailed and functioning rear spare track holders ready mounted on two metal rails. Use with PA0039T